Home / News / Industry News / What is the suitable installation height of the shower head

What is the suitable installation height of the shower head

It is not difficult to install the shower head, but many people do not know how high the shower head should be installed. In fact, if you master the installation height of the shower head, you can also install the shower head correctly.
The installation height of the shower head is generally about 2.1--2.2 meters, and the distance between the shower head and the head of the human body is about 40 cm. It is inconvenient to use if it is too close, and it is easy to touch the shower head. If it is too far, the water temperature will decrease and the hot water will be wasted. (The water temperature of the shower head sprays from the nozzle and drops 3-5 degrees to the ground) It can also be adjusted according to the height of the family.
The height difference of the family is relatively large, you can buy a shower with a lifting function and adjust it according to the height. Generally, the water inlet of the exposed shower is about 0.9-1.1 meters away from the ground. The height of the concealed shower is the same as that of the exposed one, but the water pipe is pre-buried in the wall.
After purchasing a shower, bathtub, and wall-mounted faucet, you can choose the appropriate height to bury the water pipe. The distance between the hot and cold water pipes must be 15 cm. Don't forget to flush the water pipe before installation, so as not to cause damage to the faucet due to excessive water quality. If the elbow between the faucet and the wall joint is too long, you can cut off a part of the 4-point end, remember that the 6-point connecting with the faucet cannot be cut randomly. After purchasing a concealed faucet, the valve core of the faucet should generally be pre-buried in the wall.
Ningbo Sierwo Sanitary Ware reminds everyone to pay attention to the thickness of the bathroom wall before pre-embedding. If the wall is too thin, the valve core will not be able to be embedded. When pre-embedding, the plastic protective cover of the valve core should not be removed easily, so as not to damage the valve core when it is pre-embedded by cement and other chores.

HOT PRODUCTS: