A good shower head can make you feel cool while bathing, and it is also an important tool to relax your body and mind. The shower head has been used for many years, and the quality is very important. The shower head in many people's homes will feel that the water is getting slower and slower after using it for a long time. Sometimes I don't know where the problem is. At that time, you only need to clean the shower head. Today, Hongxuan Sanitary Ware, a forging and processing manufacturer, will teach you to clean the shower head of the water heater.

From the function of use, the shower faucet is divided into a bathtub type and a shower type. If the faucet has a water outlet, it is a bathtub shower, and consumers can choose according to the situation. Some faucets have two handles, such as hot water in the left hand and cold water in the right hand. This kind of logo is clear, easy to use, and more suitable for the elderly or children. The shape of the single handle is relatively good-looking, and the hot and cold water can be adjusted left and right, which is easy to operate but needs to be used carefully to avoid scalding.

1. Non-removable ABS hand shower

If some of the small holes of the shower head in your home are blocked, put water first and see which holes are blocked at the end. Then you have to turn on the shower head of the shower and see that this shower head, like a shower head, has a lot of small holes. This is where the water comes out. Then we will prepare a needle first, and then use the needle to pierce the impurities in the perforation with the needle until the hole is free of impurities. This method is the most direct, but be careful to puncture the shower hole. If your home is not adjustable water size, it is basically impossible to disassemble, because most of those are welded by plastic welding (ultrasonic).

2. Detachable shower head

Remove the shower head and place it in a small basin, water the surface and interior of the shower head with edible white vinegar and soak it for 4-6 hours, and then gently wipe the water outlet on the surface of the shower head with a cotton rag: Water for a while, wait for the white vinegar and scale to flow out with the water, so as to eliminate or reduce the influence of scale on the shower head, and can play a certain bactericidal effect. However, do not use strong acid when removing scale, so as not to cause corrosion to the shower surface. The shower head consists of nothing more than a water outlet cover and a handle. If your home can adjust the size of the water, there should be a software circle in the middle. You close it tightly, and then rotate it counterclockwise (or clockwise), so that it should come out. .

If it is a metal shower, you can often wipe the plated surface of the shower with a soft cloth and a little flour, and then rinse with water to make the surface of the shower as bright as new. Shower head cleaning should be done every month or less. In addition, it should be noted that the ambient temperature of the shower head cannot exceed 70C. High temperature and ultraviolet light will greatly accelerate the aging of the shower head and shorten the service life of the shower head. The shower head cannot be installed directly under the Yuba, and the distance should be more than 60CM.